Дамп для DH-IPC-HDW1320SP-0360B

A

alex23

Member
Пiсля вимиканная свiтла нема признаку життя. Спробував прошили через UARD прошити також не бачить флешку. Замовив новi флешки але не маю дампа i зняти також не матиме можливостi ((. Може десь хтось робив копiю.

Ось те що знялось

Caio0.bin

drive.google.com drive.google.com


Дякую.
 
Останнє редагування:
A

alex23

Member
Техпідтримка VidiMost.com сказав(ла):
Просто скопіювати недостатньо, потрібно потім змінити серійний номер і макадресу.
Натисніть, щоб розгорнути...
це веселиш. Томущо докомунтiв та коробок нематиме (( я так розумiю срiйник можно взяти знаклейки на платi? а вот mac де брати поки не знаю
 
A

alex23

Member
Техпідтримка VidiMost.com сказав(ла):
Все вірно, на етикетці всі дані є, також їх можна побачити в рідному дампі
Натисніть, щоб розгорнути...
Строго дампа нажаль нема так как флешка мертва. даннi яки нiбитто считало це каракулi ))
Але питанна бачу у логах що iде зветання на Net: Detected MACID. Там теж якicь mac але на етекецi такого нема
 
A

alex23

Member
Щось таке:
Код: 
U-Boot 2010.06-svn3112 (Jun 04 2016 - 04:21:19)

I2C:   ready

DRAM:  110 MiB

gBootLogPtr:00b80008.

spinor flash ID is 0xc81840c8

*** Warning - bad CRC, using default environment


partition file version 2

rootfstype squashfs root /dev/mtdblock5

TEXT_BASE:01000000

Net:   Detected MACID:00:12:34:56:78:9a

PHY:0x001cc816,addr:0x00

phy RTL8201 init


Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                             gh gateway 192.168.1.1

Download Filename 'upgrade_info_7db780a713a4.txt'.

Download to address: 0x5000000

Downloading: *

Retry count exceeded; starting again

Try again use backup_serverip

*** ERROR: `serverip' not set

Failed to get info.txt

Fail to get info file!

Init error!

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                             gh gateway 192.168.1.1

Download Filename 'failed.txt'.

Download to address: 0x2000000

Downloading: *

Retry count exceeded; starting again

state:ff,err_count:04

SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device

## Booting kernel from Legacy Image at 02000000 ...

   Image Name:   Linux-3.10.50

   Created:      2016-06-03  18:05:38 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    1506992 Bytes = 1.4 MiB

   Load Address: 00208000

   Entry Point:  00208000

   Verifying Checksum ... OK

   Loading Kernel Image ...OK

OK

partition file version 2

rootfstype squashfs root /dev/mtdblock5

fail to load bootargsParameters.txt

fail to load bootargsParameters.txt file

get bootargs info failed


Starting kernel ...

unknown core,use back




BusyBox v1.18.4 (2015-10-21 12:02:45 CST) built-in shell (ash)

Revision: 11734

Enter 'help' for a list of built-in commands.
 
P

pva1664

Active member
Если дамп Cali0.bin ваш, значит id и mac ID=1L01002PAU01577 ethaddr=4C:11:BF:F6:A7:82 тоже ваши.
 
P

pva1664

Active member
Понятно. Про "более живую камеру" я не знал. Шейте все камеры одним дампом, а id и mac по UART поменяете.
 
A

alex23

Member
вот что в консоле выдает

Код: 
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:03
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2016-06-03  18:05:38 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1506992 Bytes = 1.4 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
crashflasg:1, logmagic:54410011.
unknown core,use back



BusyBox v1.18.4 (2015-10-21 12:02:45 CST) built-in shell (ash)
Revision: 11734
Enter 'help' for a list of built-in commands.

~ # help
Built-in commands:
------------------
        . : alias bg break cd chdir continue eval exec exit export false
        fg hash help jobs kill let local pwd read readonly return set
        shift source times trap true type ulimit umask unalias unset
        wait

~ #
Так понимаю через set надо указывать
 
A

alex23

Member
Указал mac и id через set

далее выдает только вот такое:

Код: 
U-Boot 2010.06-svn3112 (Jun 04 2016 - 04:21:19)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
*** Warning - bad CRC, using default environment

partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:00:12:34:56:78:9a
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:03
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2016-06-03  18:05:38 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1506992 Bytes = 1.4 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
unknown core,use back



BusyBox v1.18.4 (2015-10-21 12:02:45 CST) built-in shell (ash)
Revision: 11734
Enter 'help' for a list of built-in commands.

~ # help
Built-in commands:
------------------
        . : alias bg break cd chdir continue eval exec exit export false
        fg hash help jobs kill let local pwd read readonly return set
        shift source times trap true type ulimit umask unalias unset
        wait
 
A

alex23

Member
Я так понимаю надо теперь шить через TFPT? Так как по логам не видно чтоб оно пыталось web загрузить да и далее пойти тоже. Исходя из HWID надо шить Hx1x2x-Themis

По итогу вот что получил:

Код: 
U-Boot 2010.06-svn3112 (Jun 04 2016 - 04:21:19)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
*** Warning - bad CRC, using default environment

partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:00:12:34:56:78:9a
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                       gh gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                       gh gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:01
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2017-05-16   7:29:55 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558304 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
crashflasg:1, logmagic:54410011.
unknown core,use back


U-Boot 2010.06-svn3112 (Jun 04 2016 - 04:21:19)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
*** Warning - bad CRC, using default environment

partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:00:12:34:56:78:9a
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:02
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2017-05-16   7:29:55 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558304 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
unknown core,use back
И далее цикличный перезапуск
 
Останнє редагування:
Техпідтримка VidiMost.com

Техпідтримка VidiMost.com

Спеціаліст
Команда форуму
Вам потрібно прописати printenv і перевірити чи прописані правильно ID, MAC, HWID. Далі прошити всі розділи прошивки знову (run da, run up)
 
A

alex23

Member
А для востановления файлы брать с этой темы?

Проблема с Hx1x2x-Themis

Добрый день. Камера DH-IPC-HFW2220RP-VFS отказалась работать. Подключился через UART. Пробовал залить прошивки (через uart+tftp): IPC-HX1X2X-Themis_Eng_P_V2.400.0000.21.R.20151104 и IPC-HX1X2X-Themis_Eng_P_V2.620.0000.0.R.20170620 Не помогло. Подскажите в чем проблема. За ранее благодарю...
www.dahuacctv.com

Из printenv:

Код: 
bootdelay=3
baudrate=115200
ipaddr=192.168.1.108
serverip=192.168.1.1
autoload=yes
gatewayip=192.168.1.1
netmask=255.255.255.0
dh_keyboard=1
appauto=1
sysbackup=1
logserver=127.0.0.1
loglevel=4
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
pd=tftp 0x02000000 pd-x.squashfs.img; flwrite
ethact=ambarella mac
BSN=2G05A7EPAX03043
HWID=IPC-HDW1320S:01:02:05:19:18:00:01:00:00:00:00:258:00:00:00:00:00:00:00:00:100
devalias=IPC-HDW1320S
da=tftp 0x2000000 dhboot.bin.img; flwrite; tftp dhboot-min.bin.img;flwrite
dr=tftp 0x2000000 romfs-x.squashfs.img; flwrite
dk=tftp 0x2000000 kernel.img; flwrite
du=tftp 0x2000000 user-x.squashfs.img; flwrite
dw=tftp 0x2000000 web-x.squashfs.img; flwrite
dc=tftp 0x2000000 custom-x.squashfs.img; flwrite
dt=tftp 0x2000000 data-x.squashfs.img; flwrite
dp=tftp 0x02000000 partition-x.cramfs.img;flwrite
up=tftp 0x2000000 update.img; flwrite
tk=tftp 0x200100 hawthorn.dts.dtb;tftp 0x2000000 uImage;bootm 0x2000000
bootcmd=sf read 0x200100 0x8000 0x8000;sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000
bootargs=console=ttyS0,115200 mem=110M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc
filesize=205040
fileaddr=2000000
ID=указал свой с налейки
ethaddr=3C:ED:8C:DA:D0:C7
MAC=3C:ED:8C:DA:D0:D8
stdin=serial
stdout=serial
stderr=serial
Поле загрузки зависает на :

Код: 
U-Boot 2010.06-svn4581 (Jun 05 2017 - 17:13:30)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
sync..
buf no align with 8 bytes,len:0x800
finish sync.
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParametersV22.txt
fail to load bootargsParametersV21.txt
fail to init bootargsParametersV2
TEXT_BASE:01000000
Net:   Detected MACID:3c:ed:8c:da:d0:c7
PHY:0x001cc816,addr:0x00
phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
string value is 0
AUF_getValidLine, the end of file
Failed to get a Line;Crc check error!
PreProcess data error!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
Support backupVer:255
state:5a,err_count:01
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2019-09-30   9:46:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558512 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed
 
Останнє редагування:
A

alex23

Member
Техпідтримка VidiMost.com сказав(ла):
Так, звіряєте ваш HWID з прописаними в файлі check.img і вперед згідно інструкції
Натисніть, щоб розгорнути...
Увы (((. Видать что то не то

Logs1.txt

drive.google.com drive.google.com

Код: 
U-Boot 2010.06-svn3287 (Aug 25 2016 - 03:16:39)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
sync..
buf no align with 8 bytes,len:0x800
finish sync.
partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:3c:ed:8c:da:d0:c7
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:5a,err_count:01
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2019-09-30   9:46:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558512 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
crashflasg:1, logmagic:54410011.
Хотя все HWID совпадают.
 
A

alex23

Member
Техпідтримка VidiMost.com сказав(ла):
Ви конфіг чистили cfgRestore?
Напишіть
setenv dh_keyboard 0
saveenv
і киньте повний лог
Натисніть, щоб розгорнути...
Все что есть в теменале:
Код: 
U-Boot 2010.06-svn3287 (Aug 25 2016 - 03:16:39)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:3c:ed:8c:da:d0:c7
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Hit any key to stop autoboot:  0
>setenv hd_keyboard 0
>saveenv
Saving Environment to SPI Flash...
Erasing SPI flash...
Writing to SPI flash...
done
>cfgRestore
config erased.
>reset
resetting ...
>

U-Boot 2010.06-svn3287 (Aug 25 2016 - 03:16:39)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:3c:ed:8c:da:d0:c7
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:5a,err_count:00
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2019-09-30   9:46:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558512 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
crashflasg:1, logmagic:54410011.


U-Boot 2010.06-svn3287 (Aug 25 2016 - 03:16:39)
I2C:   ready
DRAM:  110 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc81840c8
partition file version 2
rootfstype squashfs root /dev/mtdblock5
TEXT_BASE:01000000
Net:   Detected MACID:3c:ed:8c:da:d0:c7
PHY:0x001cc816,addr:0x00
phy RTL8201 init

Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:00
SPI probe: 16384 KiB GD25Q128C at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.50
   Created:      2019-09-30   9:46:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1558512 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
crashflasg:1, logmagic:54410011.
Выше я кидал файл со всеми действиями и логами
 
Ви повинні увійти або зареєструватися, щоб відповісти.
Зверху